PVC podlaha je nový typ lehkého materiálu dekorace podlahy, který je velmi oblíbený v dnešním světě, známý také jako „lehký podlahový materiál“ . Je to populární produkt v Evropě, Americe, Asii, Japonsku a Jižní Koreji. vstoupil na čínský trh na počátku 80. let a byl na začátku 80. let 20. let. Domy, nemocnice, školy a kanceláře . Budovy, továrny, veřejná místa, supermarkety, obchod a další místa .
"PVC floor" refers to the floor made of polyvinyl chloride materials. Specifically, polyvinyl chloride and its copolymer resin are used as the main raw materials, and fillers, plasticizers, stabilizers, colorants and other auxiliary materials are added. On a continuous sheet of substrate, it is coated or calendered, extruded or Extruded . Proces Producted .
Jak konstruovat podlahu PVC?
First of all, it is the room temperature condition of PVC floor construction. It is required that the indoor temperature must be maintained between 15 degrees and 25 degrees during construction. And to ensure that water and electricity can be used normally, and at the same time have the necessary leakage protection measures. The ground base before construction must meet the national requirements: flat and dry, clean and compact, hard and bez dalších nečistot, jako je tuk .
The first step is the ground base treatment before the construction of the PVC floor. Use a floor sanding machine to polish the entire ground that needs to be laid to clean up some impurities on the surface of the floor. Some raised, loose and hollow ground must be removed. Then clean up the debris and dust generated by the grinding, and repair the cracks to ensure the perfect combination of the Selfleveling Adhesive a základní vrstva .
Druhým krokem je samoleva a vyrovnávání . Operace konstrukce samostatně je třeba provést, když je primer zcela suchý a neexistuje žádná akumulace kapaliny . Proto je během samové konstrukce nutné, aby se promíchala, je to nejlépe, je to promíchání a chraplavý pro míchání, a to je nejvíce, je to, že je to promíchání, a je to, že je to promíchání a chrapnutí je pro míchač a chrastí na míru a chrapla Cement .
The third step is the laying of PVC floor. It is best to unfold the paving materials for more than 24 hours before laying, which can reduce the color difference of different batches of materials. Therefore, it is best to put together PVC flooring materials of the same batch and the same color when unfolding, so that there will be no obvious color difference when laying easily, which will affect the overall efekt .
Čtvrtým krokem je ošetření švů . Konstrukce musí být provedena 24 hodin po položení podlahy a lepidlo je zcela vyléčeno před drážkou a svařováním může být provedeno . Všimněte si, že hloubka drážky je s výhodně dvěma třetiny tloušťky podlahy a je třeba provést prach a debis musí být odstraněna a debis v otočení v otočení v otočení v tloušťce v tloušťce v podlaze, a to, že se musí být odstraněna a debis, který je třeba odstranit v prachu a debis, a debiru, a to, že se zapínají. svařování, aby bylo zajištěno praktičnost PVC podlahy .
